Article 5.2.3bis.1.4.


Before waste materials are received at the incineration or co-incineration installation, the operator of the installation at least follows the following reception procedures:


check of the required documents;


check of conformity of the delivered waste materials with the written information. If relevant to this end, the waste materials are sampled and analysed in a representative way, where the parameters to be analysed are determined in such a way that conclusive verification of conformity is ensured. The samples taken are then kept for at least one month after incineration.


Before dangerous waste materials can be accepted at the incineration or co-incineration installation, the operator must also have a description of the waste materials in which the following information is specified:


the source and the origin of the waste material;


the physical and chemical composition of the waste materials, as well as all information needed to evaluate the suitability of the materials for the intended incineration process based on aspects including the analysis of the waste materials;


the dangerous properties of the waste materials, the materials with which they may not be mixed and the precautionary measures to be taken when treating the waste material;

Acceptance takes place on the basis of documents that contain the above-mentioned information.